• The unit consists of a vertically mounted 3 hp motor which drives the rotar shaft through
• bearinghousing
• The rotor has 12 swinging type knife blades & 2 scrapper blades
• A screen of suitable mesh is mounted outside the rotor and material to be granulated is fed from a stainless steel hopper
• The unit is mounted on a suitable standand is provided with DOL starter with reversible switch and one no. stainless steel screen

• The machine is suitable for sifting granules & powder
• The machine is provide with a S.S. screen & is driven by a vertical motor
• The screen frame & discharge chute etc. are made out of S.S.
• The unit does not require any foundation & is provided with heavy duty castor wheels for mobility
• The unit is supplied complete with one S.S. sieve of any mesh
• Capacity 20" dia & 30"dia

• Suitable for mixing of dry & wet material
• All contact parts are fabricated from 304 quality stainless steelwith 2 mechanical seal ends to prevent outside lubricants from entering into the mixing chamber
• Paddles 3"thick are arranged on the shaft to give thoroughly uniform mixing
• Among the other provisions are a tilting arrangement,reversible switch &safety lock-switch to stop the machine as soon as the cover is opened
• The drive is through a 3 ph electric AC motor & a suitable gear box
• Available from 10 kgs-500 kgs

• GMP model : The unit is a very precision machine performing dry mixing and wet granulation in the same bowl in only 6 to 12 minutes.
• The entire operation is fully automatic including the discharge.
• All parts coming in contact with the material to be mixer are made of stainless steel 316 quality and are highly polished.

• It is suitable for free flowing of granular powdered materials and can dry wet materials.
• All contact part are made out of S.S.304 quality and non contact parts made out of M.S.
• The unit is provided with suitable motors.

• DRYING OVENS (TRAY DRIERS) Suitable for drying granules etc.
• The oven is double walled, duly insulated and is fitted with 'U' type Escort heaters.
• A > motor driven blower circulates the hot air.
• Fresh air is drawn in and moist air exhausted by means of dampers provided.
• The temperature is controlled by a thermostat. Supplied with panel box fitted with indicator lamps, thermometer, starter, contactor etc.

Unit is supplied complete with suitable stainless steel sieve, driven by a motor (3 ph AC 440 V.)

• Available with & without jacket
• Suitable for mechanical mixing of dry powders or wet mass etc.
• The unit is provided with a S.S. mixer stirrer/beater
• The stirrer shaft moves on its axis while simultaneously rotating around the bowl thereby giving effecient mixing
• The bowl is provided with castor wheel for easy handling
• The unit is supplied with all contact parts of stainless steel and is driven by means of suitable 3 phase A.C. electric motor through an oilfilled gear box
• The unit is easily cleanable
• Available from 15 kgs-I.M.T

• The machine is a Single Stroke heavy duty Multi Punch type machine used to press tablets using a single stroke
• Can produce one or more than one tablet of a maximum diameter of 1/2" & further dependant upon the size and shape of the tablet.
• The machine is is driven by an electric A.C.motor - 1 H.P 3 phase 440V.
• The machine is supplied without dies, punches and electric starter.
• Dies and punches if required have to be ordered separately

• Used for film coating of tablets, granules.The vessel is made out of S.S. 316 quality
• The liquid is pressurised by compressed air. A specially designed nozzle is provided to get uniform conical spray.The liquid and air flow can be adjusted separately by needle valve. The spray assembly can be provided with maximum three nozzles
• The unit is also provided with pneumatic (air) motor with stirrer for agitation the solution.
• The unit is mounted on four S.S.legs with caster wheels.
• The assembly can be adjusted horizontally, vertically, angularly and mounted on separate S.S.stand.
• The unit is supplied complete with Air motor, air moisture separator cum filter, Air regulator pressure guage 2 numbers, safety valve Airvent, S.S.Stand with valve and nozzle 2 numbers.

• The unit is fabricated from 304 quality S.S. & fitted on a drive arrangement having a suitable oil filled worm gear box and motor
• The unit is also equipped with a suitable hot air blower with thermostatic control
• Available in sizes of 12"-60" dia pans

OCTOGONAL BLENDER
The container is mounted on plummer blocks on a channel / tubular frame

Drive is by means of an electric motor & reduction gear box through a chain drive to give a final 4 to 5 RPM . Motors used are 3 phase

The larger units are provided with a mouth with a butterfly valve for charging and discharging material

• Use in the packing department
• Standard table length 10 ft or 300cms. can be made longer
• Available in Std & GMP models
• Drive by Electri motor through Gearbox
• 3 fixed speeds provided in standard unit or option of
• Supply with A/C variator for speed variation with digital display.
• 9" belt width Non Taxic PVC Belting